Home / News & Industry Trends / AOHI AOC-C024: 170W PD3.2 Charger Adds Displ
NEWSAOHI AOC-C024: 170W PD3.2 Charger Adds Display, App and 200W Boost
A 2C1A desktop charger with 140W per USB-C port, PD3.2 SPR AVS, an AHB half-bridge GaN 6.0 stage and Bluetooth control of per-port power limits.
Oct 29, 2026 · Dangel Technology editorial
AOHI has introduced the AOC-C024, a 170W desktop charger built around USB PD3.2 with an integrated LCD status display, and the unit has passed China's 3C certification. The body is a rounded grey block measuring about 80 x 74.5 x 36mm and weighing roughly 360g, with folding pins and a yellow trim around the port cluster.
Output is 2C1A: each USB-C port delivers up to 140W on its own, the USB-A port up to 30W, and the total is capped at 170W. Supported protocols include PD3.2, PD3.1, PPS, QC, FCP, SCP, AFC and DCP, and the USB-C ports support PD3.2 SPR AVS, which the company says allows up to 60W of dynamically adjusted charging for the iPhone 18 series.
An AI dynamic allocation scheme holds 140W continuously on a single port and redistributes power as devices are added or removed, without interrupting or restarting charging on the other ports. Three modes are offered: smart, boost and custom, and the boost mode raises the ceiling to 200W above the normal 170W total.
A Bluetooth link to a companion app exposes per-port power, total power, temperature and the active mode; ports can be switched on or off individually and each output trimmed in 1W steps. The app also delivers OTA updates for both the charging protocols and the on-screen interface, so protocol support can be extended after shipping.
The display sits on the front face with a hidden touch strip beneath it for page switching, wake and screen rotation. Inside, the charger uses an AHB half-bridge topology with GaN 6.0 switching devices and a thermal algorithm, plus nine protection layers covering ESD, overtemperature, overvoltage, overcurrent, short circuit and flame-retardant requirements.
Key points
- 170W total, 2C1A: 140W per USB-C, 30W USB-A, 200W boost mode
- PD3.2 SPR AVS on USB-C, plus PD3.1, PPS, QC, FCP, SCP, AFC, DCP
- AHB half-bridge with GaN 6.0, AI thermal control, nine protections
- Bluetooth app: 1W-step per-port limits, OTA protocol and UI updates
Industry news compiled by Dangel Technology editorial from public reporting by Chongdiantou (charging industry media). Technical figures are reproduced as reported; verify specifications against the original source before design or procurement decisions.
Sourcing GaN USB-C chargers
Dangel Technology supplies GaN USB-C PD chargers from 20W to 600W on an OEM/ODM and private-label basis, with certification documentation arranged per model and destination market.