Home / News & Industry Trends / Teardown: Sharge Vision Mag Magnetic Power B
TEARDOWNTeardown: Sharge Vision Mag Magnetic Power Bank Adds Color Display
Sharge's Vision Mag pairs an 18.5Wh cell, 15W wireless output and 20W USB-C PD with an SW6236W SoC and a full-colour status display.
Oct 10, 2026 · Dangel Technology editorial
Sharge's Vision Mag, model M8, is a magnetic power bank rated 18.5Wh from a 5,000mAh cell at 3.7V, with a rated output capacity of 3,000mAh at 5V. ChargerLAB's teardown examines how the 102.72 x 72.03 x 11.72 mm, 143.2g unit is put together. Its single USB-C port is specified for 5V/3A and 9V/1.67A input, up to 15W, and 5V/3A or 9V/2.22A output, up to 20W.
Wireless output is selectable at 5W, 7.5W or 15W, and combined USB-C plus Qi output is capped at 10W plus 5W, for 15W total. A full-colour display on the front face shows remaining capacity and real-time charging power, and during wireless charging it reads and displays the model of the attached iPhone.
Protocol testing with a POWER-Z KM003C found support for QC3+, FCP, SCP, AFC, PD3.0/PPS, DCP and Apple 2.4A. The reported PDO set covers 5V/3A and 9V/2.22A fixed voltages plus two PPS ranges, 5-5.9V/3A and 5-11V/2A.
Inside, the pack uses a 5,000mAh, 18.5Wh cell paired with an XB8886G single-cell protection IC in SOP8. The main power-bank SoC is an SW6236W in QFN52, specified for 5A switching charge and up to 22.5W synchronous boost, with support for PD3.1/PPS, SCP, FCP, QC, AFC, PE and BC1.2, plus a built-in coulomb counter and 12-bit ADC.
The wireless stage is built around an N9006B controller and a 40V, 6.2mΩ resonant MOSFET in a DFN3.3x3.3 package. A ZX9600 driver and a 16Mbit P25Q16SH NOR flash handle the display. Two NTC thermistors monitor the cell and the wireless coil independently, while thermal adhesive and a conformal coating cover the PCBA.
Key points
- 18.5Wh (5,000mAh) cell, 3,000mAh rated output at 5V, 143.2g total
- 15W magnetic wireless plus 20W USB-C PD, 15W combined output cap
- SW6236W SoC: 5A charge, 22.5W boost, PD3.1/PPS and SCP support
- XB8886G protection IC with separate cell and coil NTC monitoring
Industry news compiled by Dangel Technology editorial from public reporting by Chongdiantou (charging industry media). Technical figures are reproduced as reported; verify specifications against the original source before design or procurement decisions.
Sourcing GaN USB-C chargers
Dangel Technology supplies GaN USB-C PD chargers from 20W to 600W on an OEM/ODM and private-label basis, with certification documentation arranged per model and destination market.